Hello everyone, today I'm here to answer some questions about how to start the Touareg without a key. Many people don't know how to start the new Touareg smart key for Volkswagen, so today I will analyze it for you. Let's take a look together! If this solves your problem, please pay attention to our website. Thank you~

What can I do if the Touareg is out of power and the mechanical key cannot open the door?

You can use another vehicle's battery to jump-start it, and then you can open the car door.

Materials needed:

A set of jumper cables, a rescue vehicle

Specific steps:

1. When the vehicle's battery is drained and cannot start, you usually use jumper cables to start the car. Get the prepared car battery and jumper cables.

2. Open the engine hood and battery cover of both vehicles to expose the positive and negative terminals of the batteries. Both the rescue vehicle and the vehicle being rescued should have their engines turned off, and make sure to correctly identify the positive and negative terminals of the batteries.

3. Take one of the jumper cables, connect one end to the positive terminal of the dead battery, and connect the other end to the positive terminal of the fully charged battery. Never let the positive and negative terminals touch each other to avoid short circuits!

4. Take another jumper cable, first connect one end to the negative terminal of the fully charged battery, and then connect the other end to the negative terminal of the low battery vehicle.

5. After the cables are connected, you can start the low battery vehicle and open the car door.

How to start the Volkswagen Touareg V6?

The correct ignition method is as follows:

Insert the key and rotate it to the ACC position, and wait for about 2-3 seconds to allow the main power relay contacts to establish a stable connection and allow the first part of the devices that require power to be powered on; continue to turn the key to the ON position and stop for 6-10 seconds to allow the fuel pump relay to engage, wait for all the sensors to adjust their status, and then turn the key to the START position to start the engine continuously. Return to the ON position after the engine is successfully started with the guidance of the computer to automatically adjust the optimal position and parameters. Finally, the engine starts successfully. However, for temporary or short-term parking, there is no need to pause. Just start the engine quickly after the yellow indicator on the instrument panel goes out.

Most people are used to starting the engine immediately after inserting the key. In fact, this is incorrect. Even with the popular one-key startup system nowadays, you cannot start the engine immediately after inserting the key, otherwise it will damage the engine. This is because the engine is still in a cooling state, especially for vehicles that have been parked for a long time. The running parameters of the engine are completely different from the previous hot state, and each sensor needs to be re-adjusted. If you start the engine immediately after inserting the key, the running parameters of the engine will be abnormal raw data, resulting in startup failure or multiple startup failures. Even if the startup is successful, it will cause excessive fuel consumption or engine overheating. Because the computer has an automatic memory function, if this continues for a long time, the incorrect data will overwrite the correct data, resulting in weak climbing ability, high fuel consumption, severe carbon deposits, engine overheating, and other soft faults. These faults are difficult to diagnose and even repairing the engine cannot eliminate the faults.

How to start the new Touareg smart key for Volkswagen?

Step on the brake and turn the key to start. If it is a one-key startup, press the brake and the start button. I hope this helps you. If you don't understand, please continue to ask, and I will patiently answer for you. [Questions about cars? Ask the car master. Professional technicians from 4S stores can solve them in 10 minutes.]